The advantage of the bolt ball joint: The bolt ball is composed of steel balls, high-strength bolts, fastening bolts, sleeves, cones or sealing plates. There are multiple holes with inner wires on one ball to connect multiple The rod is at one point and is mainly used in the grid structure, which plays the role of connecting the rod and the rod. Bolt balls are widely used in tubingless downhole oil production devices, tubing gauges and other fields. They have the characteristics of small nodes, light weight, wide application range and convenient use.

Bolt ball processing has many advantages, such as fast construction speed, good integrity, stable structure, large space rigidity, and effective use of space. It is favored by major construction industries. Staff should pay attention to the processed materials when processing grid bolt balls. As well as the requirements of production, there will be certain differences in the size of the sphere or the size of the hole in the bolt ball required for different parts, so you must pay attention to the processing, and also pay attention to the burrs and cracks produced during the processing. .

In the process of processing grid bolt balls, precautions are inevitable. The five precautions for processing grid bolt balls can improve the safety of the bolt ball grid structure.

1. The quality and specifications of the materials required for bolt ball processing should meet the quality requirements specified in the standards and design documents.

2. The technical personnel should review the construction drawings, refine the node structure, and design the processing details of the project according to the drawings.

3. Before cutting the grid steel, the cutting area must be carefully cleaned to remove impurities such as rust, oil and splash on the edge.

4. When setting out and measuring the bolt ball processing, reserve the welding shrinkage required for production and installation and the processing margin for cutting, edge planing and milling according to the process requirements.

5. There must be no cracks and missing edges larger than 1.0mm on the fracture of the bolt ball processing, and the burrs around the weld are cleaned.